Introduced in 0.17.0
By default, Dokku will constrain the amount of output displayed for any given command run. The verbosity of output can be increased by enabling trace mode. Trace mode will turn on the
set -x flag for bash plugins, while other plugins are free to respect the environment variable
DOKKU_TRACE and log differently as approprate. Trace mode can be useful to see where plugins are running commands that would otherwise be unexpected.
To enable trace mode, run
Trace mode can be disabled with
I deployed my app but I am getting the default nginx page.
Most of the time it's caused by some defaults newer versions of nginx set. To make sure that's the issue you're having run the following:
If you get a similar error just edit
/etc/nginx/nginx.conf and add the following line to your
Note that the
server_names_hash_bucket_size setting defines the maximum domain name length.
A value of 64 would allow domains with up to 64 characters. Set it to 128 if you need longer ones.
Save the file and try stopping nginx and starting it again:
EXPOSE directive in a Dockerfile may be another reason why you might see the default site. When the
EXPOSE directive is in use and a proxy plugin is enabled (the default), the proxy plugin will listen to requests on the ports specified in the
For example, if you have an
EXPOSE directive like so:
The proxy port mapping will be
To avoid this issue, either of the following can be done:
EXPOSEdirective: This will require respecting the
$PORTenvironment variable (automatically set by Dokku). Once that change is deployed, the port mapping should be cleared via the
dokku proxy:ports-clear $APPcommand (where
$APPis your app name).
- Update the port mapping: Updating the port mapping to redirect port
80to your app's exposed port via
dokku proxy:ports-set $APP http:80:$EXPOSED_PORTcan also fix the issue. This will also allow certificate management and the letsencrypt plugin to work correctly.
See the port management documentation for more information on how Dokku exposes ports for applications and how you can configure these for your app.
I want to deploy my app, but while pushing I get the following error
The following error may be emitted from a deploy:
remote rejected error does not give enough information. Anything could have failed. Enable trace mode and begin debugging. If this does not help you, create a gist containing the full log, and create an issue.
One the reasons why you may get this error is because the command that is run in the container exited (without errors). For example, (in Procfile) when you define a new worker container to run Delayed Job and use the bin/delayed_job start command. This command deamonizes the process and exists. The container thinks it's done so it closes itself. The error you get is the one above. To fix the above problem for Delayed Job, you must define the worker to user rake jobs:work, which doesn't deamonize the process.
I get the aforementioned error in the build phase (after turning on Dokku tracing)
Most errors that happen in this phase are due to transient network issues (either locally or remotely) buildpack bugs.
Find the failed phase's container image (
077581956a92 in this example).
Start a new container with the failed image and poke around (i.e. ensure you can access the internet from within the container or attempt the failed command, if known).
Sometimes (especially on DigitalOcean) deploying again seems to get past these seemingly transient issues. Additionally we've seen issues if changing networks that have different DNS resolvers. In this case, you can run the following to update your
Please see https://github.com/dokku/dokku/issues/841 and https://github.com/dokku/dokku/issues/649.
After adding an SSH key, I am told I cannot read from the remote repository on push
Certain systems may have access to the
dokku user via SSH disabled. Please check that the
dokku user is allowed access to the system in the file
/etc/security/access.conf. As Dokku does not manage this file, please consult your Operating System's documentation for more information.
I want to deploy my app but I am getting asked for the password of the Git user
Sometimes the following error message may be shown on push
You get asked for a password because your SSH secret key can't be found. This may happen if the private key corresponding to the public key you added with
sshcommand acl-add is not located in the default location
You have to point SSH to the correct secret key for your domain name. Add the following to your
Also see issue #116.
I successfully deployed my application with no deployment errors and receiving Bad Gateway when attempting to access the application.
In many cases the application will require the a
process.env.PORT port opposed to a specified port.
When specifying your port you may want to use something similar to:
Please see https://github.com/dokku/dokku/issues/282.
Deployment fails because of slow internet connection, messages shows
gzip: stdin: unexpected end of file.
If you see output similar this when deploying:
Command: 'set -o pipefail; curl --fail --retry 3 --retry-delay 1 --connect-timeout 3 --max-time 30 https://s3-external-1.amazonaws.com/heroku-buildpack-ruby/ruby-2.0.0-p451-default-cache.tgz -s -o - | tar zxf -' failed unexpectedly: ! ! gzip: stdin: unexpected end of file ! tar: Unexpected EOF in archive ! tar: Unexpected EOF in archive ! tar: Error is not recoverable: exiting now
it might that the cURL command that is supposed to fetch the buildpack (anything in the low megabyte file size range) takes too long to finish, due to slowish connection. To overwrite the default values (connection timeout: 90 seconds, total maximum time for operation: 600 seconds), set the following environment variables:
Please see https://github.com/dokku/dokku/issues/509.
Another reason for this error (although it may respond immediately ruling out a timeout issue) may be because you've set the config setting
SSL_CERT_FILE. Using a config setting with this key interferes with the buildpack's ability to download its dependencies, so you must rename the config setting to something else, e.g.
Build fails with
This generally occurs when the server runs out of memory. You can either add more RAM to your server or setup swap space. The follow script will create 2 GB of swap space.
I successfully deployed my application with no deployment errors but I'm receiving Connection Timeout when attempting to access the application.
This can occur if Dokku is running on a system with a firewall like UFW enabled (some OS versions like Ubuntu have this enabled by default). You can check if this is your case by running the following script:
If the previous script returned
Status: active and a list of ports, UFW is enabled and is probably the cause of the symptom described above. To disable it, run:
I can't connect to my application because the server is sending an invalid response, or can't provide a secure connection.
This isn't usually an issue with Dokku, but rather an app config problem. This can happen when your application is configured to enforce secure connections/HSTS, but you don't have SSL set up for the app.
In Rails at least, if your
environmnents/production.rb include the line
configure.force_ssl = true which includes HSTS, try commenting that out and redeploying.
If this solves the issue temporarily, longer term you should consider configuring SSL.
My application deploys properly, but won't load in browser "connection refused"
This could be a result of a bad proxy configuration (
http:5000:5000 may be incorrect). Run
dokku proxy:report myapp to check if your app has the correct proxy configuration. It should show something like the following.
dokku proxy:ports-set front http:80:5000 to get proxy correctly configured for http endpoint.