Zero Downtime Deploy Checks¶
New
Introduced in 0.5.0
checks:disable <app> [process-type(s)] Disable zero-downtime deployment for all processes (or comma-separated process-type list) ***WARNING: this will cause downtime during deployments***
checks:enable <app> [process-type(s)] Enable zero-downtime deployment for all processes (or comma-separated process-type list)
checks:report [<app>] [<flag>] Displays a checks report for one or more apps
checks:run <app> [process-type(s)] Runs zero-downtime checks for all processes (or comma-separated process-type list)
checks:set [--global|<app>] <key> <value> Set or clear a logs property for an app
checks:skip <app> [process-type(s)] Skip zero-downtime checks for all processes (or comma-separated process-type list)
By default, Dokku will wait 10 seconds after starting each container before assuming it is up and proceeding with the deploy. Once this has occurred for all containers started by an application, traffic will be switched to point to your new containers. Dokku will also wait a further 60 seconds after the deploy is complete before terminating old containers in order to give time for long running connections to terminate. In either case, you may have more than one container running for a given application.
You may both create user-defined checks for web processes using the healthchecks key in the app.json file, as well as customize any and all parts of this experience using the checks plugin.
Info
Web checks are performed via curl on Dokku host. Some application code - such
as the Django framework - checks for specific hostnames or header values, these
checks will fail. To avoid this:
- Remove such checks from your code: Modify your application to remove the hostname check completely.
- Allow checks from all hostnames: Modify your application to accept a dynamically provided hostname.
- Specify the domain within the check: See below for further documentation.
Configuring checks settings¶
wait-to-retire¶
After a successful deploy, the grace period given to old containers before they are stopped/terminated is determined by the value of wait-to-retire. This is useful for ensuring completion of long-running HTTP connections.
Defaults to 60.
Configuring check settings using the config plugin¶
There are certain settings that can be configured via environment variables:
DOKKU_DEFAULT_CHECKS_WAIT: (default:10) If no user-defined checks are specified - or if the process being checked is not awebprocess - this is the period of time Dokku will wait before checking that a container is still running.DOKKU_DOCKER_STOP_TIMEOUT: (default:10) Configurable grace period given to thedocker stopcommand. If a container has not stopped by this time, akill -9signal or equivalent is sent in order to force-terminate the container. Both theps:stopandapps:destroycommands also respect this value. If not specified, the Docker defaults for thedocker stopcommand will be used.
The following settings may also be specified in the app.json file, though are available as environment variables in order to ease application reuse.
DOKKU_CHECKS_WAIT: (default:5) Wait this many seconds for the container to start before running checks.DOKKU_CHECKS_TIMEOUT: (default:30) Wait this many seconds for each response before marking it as a failure.DOKKU_CHECKS_ATTEMPTS: (default:5) Number of retries for to run for a specific check before marking it as a failure
Skipping and Disabling Checks¶
Info
Note that checks:disable will now (as of 0.6.0) cause downtime for that process-type during deployments. Previously, it acted as checks:skip currently does.
You can choose to skip checks completely on a per-application/per-process basis. Skipping checks will avoid the default 10 second waiting period entirely, as well as any other user-defined checks.
Zero downtime checks can also be disabled completely. This will stop old containers before new ones start, which may result in broken connections and downtime if your application fails to boot properly.
Displaying checks reports for an app¶
New
Introduced in 0.8.1
You can get a report about the app's checks status using the checks:report command:
=====> node-js-app checks information
Checks disabled list: none
Checks skipped list: none
Checks computed wait to retire: 60
Checks global wait to retire: 60
Checks wait to retire:
=====> python-app checks information
Checks disabled list: none
Checks skipped list: none
Checks computed wait to retire: 60
Checks global wait to retire: 60
Checks wait to retire:
=====> ruby-app checks information
Checks disabled list: _all_
Checks skipped list: none
Checks computed wait to retire: 60
Checks global wait to retire: 60
Checks wait to retire:
You can run the command for a specific app also.
You can pass flags which will output only the value of the specific information you want. For example:
Customizing checks¶
New
Introduced in 0.31.0
If your application needs a longer period to boot up - perhaps to load data into memory, or because of slow boot time - you may also use Dokku's checks functionality to more precisely check whether an application can serve traffic or not.
Healthchecks are run against all process from your application's Procfile. When no healthcheck is defined, Dokku will fallback to a process uptime check.
One or more healthchecks can be defined in the app.json file - see the deployment task documentation for more information on how this is extracted - under the healthchecks.web path:
{
"healthchecks": {
"web": [
{
"type": "startup",
"name": "web check",
"description": "Checking if the app responds to the /health/ready endpoint",
"path": "/health/ready",
"attempts": 3
}
]
}
}
A healthcheck entry takes the following properties:
attempts: (default:3) Number of retry attempts to perform on failure.command: (default''- empty string) Command to execute within container.content: (default:''- empty string) Content to search in http path check output.initialDelay: (default: 0, unit: seconds) Number of seconds to wait after a container has started before triggering the healthcheck.name: (default: autogenerated) The name of the healthcheck. If unspecified, it will be autogenerated from the rest of the healthcheck information.path: (default:/- for http checks): An http path to check.timeout: (default:5seconds): Number of seconds to wait before timing out a healthcheck.type: (default:""- none): Type of the healthcheck. Options: liveness, readiness, startup.uptime: (default:""- none): Amount of time the container must be alive before the container is considered healthy. Any restarts will cause this to check to fail, and this check does not respect retries.wait: (default:5seconds): Number of seconds to wait between healthcheck attempts.
Warning
Healthchecks are implemented by specific scheduler plugins, and not all plugins support all options. Please consult the scheduler documentation for further details on what is supported.
See the docker-container-healthchecker documentation for more details on how healthchecks are interpreted.
Manually invoking checks¶
Checks can also be manually invoked via the checks:run command. This can be used to check the status of an application via cron to provide integration with external healthchecking software.
Checks are run against a specific application:
-----> Running pre-flight checks
-----> Running checks for app (APP.web.1)
For more efficient zero downtime deployments, create a file CHECKS.
See https://dokku.com/docs/deployment/zero-downtime-deploys/ for examples
CHECKS file not found in container: Running simple container check...
-----> Waiting for 10 seconds ...
-----> Default container check successful!
-----> Running checks for app (APP.web.2)
For more efficient zero downtime deployments, create a file CHECKS.
See https://dokku.com/docs/deployment/zero-downtime-deploys/ for examples
CHECKS file not found in container: Running simple container check...
-----> Waiting for 10 seconds ...
-----> Default container check successful!
-----> Running checks for app (APP.worker.1)
For more efficient zero downtime deployments, create a file CHECKS.
See https://dokku.com/docs/deployment/zero-downtime-deploys/ for examples
CHECKS file not found in container: Running simple container check...
-----> Waiting for 10 seconds ...
-----> Default container check successful!
Checks can be scoped to a particular process type:
-----> Running pre-flight checks
-----> Running checks for app (APP.worker.1)
For more efficient zero downtime deployments, create a file CHECKS.
See https://dokku.com/docs/deployment/zero-downtime-deploys/ for examples
CHECKS file not found in container: Running simple container check...
-----> Waiting for 10 seconds ...
-----> Default container check successful!
An app process ID may also be specified:
-----> Running pre-flight checks
-----> Running checks for app (APP.web.2)
For more efficient zero downtime deployments, create a file CHECKS.
See https://dokku.com/docs/deployment/zero-downtime-deploys/ for examples
CHECKS file not found in container: Running simple container check...
-----> Waiting for 10 seconds ...
-----> Default container check successful!
Non-existent process types will result in an error:
Non-existent process IDs will also result in an error